Großes Problem mit das x920, Version: e2001v21_v89_zlh_hd

Voliminal

New Member
Hallo, seit zwei Monaten habe ich gekauft ein Star X920.
Die Version ist die e2001v21_v89_zlh_hd, die besondere von das erstes X920 ist, und hat gekommen auf die Markt als e2001_v89_zlh_hd.
Plötzlich etwas sehr viel komisch passieren hat. Ohne Grund der Bildschirm würde einfrieren und die Pixel haben begonnen langsam, schwarz zu werden bis die ganze Bildschirm schwarz wird, aber die Hintergrundbeleuchtung bleibt noch in Betrieb.
Das hat passiert viele Male, und nur wenn ich die Batterie aushalte wuerde das Problem geloest und das Telefon konnte normaleweiβe funktionieren.


So, das letztes Mal, das Handy konnte ueberhaupt nicht mehr einschalten.


Ich hatte das stock Rom und nur verwurzelt.


Ich habe alles auf mein Handy versucht, aber ich bekomme immer "DRAM fehlgeschlagen".
Ich habe gefunden dieser Mensch unterhalb, der weiβ wie man es beheben kann: http://www.youtube.com/watch?v=rpAab_hn6P8


Er hat mich gesagt dass ich muss die Firmware S5 downloaden und es hatte ich gemacht. Aber dieses Mal habe ich nicht bekommen "DRAM FAILED" aber die Spflash Tool konnte nicht weitergehen wenn die roten Balken bis 100% erreichen wurden.
Ich habe versucht viele Roms von needrom.com zu downloaden und die meisten von ihnen, waren von "e2001v21_v89_zlh_hd". Jedes Mal bekommte ich immer "DRAM FAILED".


Ich habe auch eine Nachricht an das Mitglied mit der Spitzname dorschdns gesendet aber bis jetzt habe ich keine Antwort bekommen.


Es ist sehr viel wichtig für mich, könnten Sie mir bitte helfen?


Ebenfalls wollte ich mich entschuldingen fuer meine nicht so gut Deutsch. Vielen Dank noch einmal und ich hoffe dass eine Loesung gibt.

I am not German, I used translator & my wife for this text. I posted to english forum, but got very poor answers..
 

Daemonarch

Chiclone-Lover
I'm afraid this sounds very hard like a hardware-failure than a software-issue...

I don't know if it's a solution to send it back to china, because you dont know if you get something back overall.

How long did the phone work when you removed the battery?
 

Voliminal

New Member
Well, I only did a battery pull to fix the freeze. Whenever my phone got this weird screen freeze, I was pulling the battery, then put it back in and *bam*, it was working well.

After some times of the same freeze, the phone would not instantly turn on, needed some time or something.

And the last time it didn't turn on at all.
 

guesa

Well-Known Member
Try to operate the phone with the charger-cable. If then the interference is eliminated then the fault is in the battery or the battery contacts.
 
Zuletzt bearbeitet:

Voliminal

New Member
I had windows 8 and I installed windows 7 in another partition.

It was like I never did it, exactly the same result. Everything behaved the same.

I don't know... maybe I have crappy mtk drivers, or I'm doing something wrong while installing them.

Let me describe the steps, and if I'm somewhere wrong you can tell me.


Well, after a clean windows 7 install, I connect the phone to the pc (with or without battery,I think I tried both, didn't see something change) it gets to "other devices" as an "unknown device". right click to update driver software, select the folder with vcom drivers.
It gets recognized as a mtk usb port.

Try to flash like that, same results.

Then I go to update driver again, but this time I click "let me pick from a list of device drivers on my computer." I uncheck show compatible hardware, then I choose MTK Preloader USB VCOM Port.

the device now shows up to the device manager as "MTK Preloader USB VCOM Port".

Try to flash, everything is the same...


I read somewhere, that the normal installation of vcom drivers is kinda different, that it get's shown up as "MTK Preloader USB VCOM Port" right away, and I read that when you install the vcom driver correctly, it connect and disconnects the device every 3 seconds.

Maybe I could ask for preloader.bin from smartdigi team from needrom.

But I didn't manage to get the preloader.bin yet, I'll ask for it, but why the official rom on needrom.com preloader.bin is not working with my phone? And why would smatdigi preloader.bin would work for me?

I tried roms that are for e2001v21_v89_zlh_hd but even their preloader wouldn't work for me.
 

Mitglieder

Statistik des Forums

Themen
54,357
Beiträge
836,878
Mitglieder
66,933
Neuestes Mitglied
j880001
Oben Unten